Hiring Tips

What Is Soft Washing and Is It Better Than Pressure Washing?

What soft washing is, how it differs from pressure washing, the low pressure and biocide chemistry, which surfaces it suits, its risks, how long results last and what to ask a cleaner before you book.

A house with a tiled roof and render, with a sprayer tank and covered plants on the lawn.

Soft washing is a cleaning method that uses low pressure water and chemical solutions to remove mildew, algae and organic stains from building exteriors. Instead of blasting dirt away with physical force, it relies on a biocide or detergent to kill moss and lichen at the root. The chemical does the heavy lifting, and the surface is then rinsed gently or left for the rain to wash clean.

Pressure figures vary. Some estimates put soft washing at under about 100 psi, while others say purpose built machines run at roughly 80 to 300 psi, about a tenth of a pressure washer's maximum. Pressure washing is put at 1,500 to 3,000 psi.

The term now covers almost any spraying of chemicals onto exterior surfaces for cleaning purposes. Because it avoids high pressure jets, it is usually the safer choice for roofs and delicate surfaces. While it is generally considered a much safer method than high pressure cleaning for the fabric of the building, the chemicals bring their own hazards to plants, paintwork and drainage.

Soft washing against pressure washing

The table below shows how the two exterior cleaning methods compare on application and typical operating pressure.

Cleaning method

How the method works

Typical operating pressure

Pressure washing

Removes dirt and growth by physical force

1,500 to 3,000 psi

Soft washing

Uses chemistry to kill growth before gentle rinsing

Under about 100 psi, or roughly 80 to 300 psi, depending on the estimate

Pressure figures vary, and the exact pressure used will depend on the machine and the surface being cleaned.

What the cleaning solution does

Cleaners use different chemicals depending on the surface and the type of stain. Sodium hypochlorite, which is a form of bleach, is the most common agent. It is generally used with a surfactant to help it cling to the surface. It works faster and is cheaper, but it is harsher on plants and exterior surfaces.

Benzalkonium chloride is a no-rinse option that is gentler on plants but slower to show results. For specific stains, the chemistry changes again. Cleaners use acids for rust removal, and they apply sodium percarbonate or sodium metasilicate to clean uncoated wood.

Chemicals must be handled strictly by the book. The Health and Safety Executive (HSE) states that before using a biocidal product, the user must read and understand the label and follow it closely. Only biocides that are authorised or approved carry an authorisation or approval number on their packaging.

There are strict rules on who can apply these treatments. Members of the general public should never use biocidal products intended only for professional users. Users must also dispose of biocidal waste and empty containers correctly, checking the label for specific disposal instructions. You can read the full rules on the HSE biocides guidance page.

Which surfaces soft washing suits

Roofs are a primary candidate for chemical cleaning because high pressure can damage roof tiles. Asphalt roofs need care. The Asphalt Roofing Manufacturers Association advises low pressure bleach or detergent assisted washing for these specific roofs.

Exterior walls are also commonly treated, but the approach depends entirely on the material. A power tool maker's exterior cleaning guide notes that stable lime and cement render can actually be pressure washed with a fan jet nozzle, provided the user does not stay on one spot. Consumer advice from Which? agrees, stating you should use a fan-jet nozzle on stable lime and cement render, start with the lowest pressure and widest spray, and test a small area first.

Other wall surfaces are far more fragile. Composite resin render is sensitive, so a cleaner must test low pressure at a safe distance on a hidden area before starting the main job. External wall insulation requires a soft brush and a mild cleaner rather than a jet wash. There is more on this in the guide to render cleaning and soft washing.

No cleaning method will fix a failing wall. You should never clean render that is crumbling, chalking, flaking or cracked. The correct approach is to recoat or renovate the surface instead. Which? also warns that the wrong detergent or too much pressure can damage surfaces. Never mix cleaning products.

Paint requires special attention before any chemical is applied. Chlorine can react with organic pigments in some paints, causing discoloration. This is especially true for reds, blues, greens and oranges. If a strong bleach solution stains these pigments, the only fix is repainting the affected area.

What takes longer and what to expect afterwards

Soft washing is not an instant fix. When a cleaner applies a low pressure biocide to a roof, it kills the moss and lichen at the root. The cleaner then leaves the rain to do the rinsing over the following weeks. Heavy lichen can take a couple of months to reach its best appearance, so the roof may look unchanged on the day of the visit.

The benefit of this slow process is how long the results last. Contractor estimates suggest that soft washed results typically last three to five years. By contrast, contractor estimates put pressure washing at six to 12 months before green growth returns. A biocide top-up every couple of years can extend the interval even further.

The exact time before a re-clean is needed depends on the material covering your roof. Contractor estimates provide the following timelines for different surfaces:

  • Clay tile stays clean for four to six years
  • Natural slate stays clean for four to six years
  • Concrete tile stays clean for three to five years
  • Synthetic or fibre-cement slate stays clean for three to five years
  • Flat roofs covered in felt, EPDM or fibreglass stay clean for two to four years

Risks and what a careful cleaner does about them

The chemicals used in exterior cleaning can be harmful to plants and animals. Strong chlorine solutions can kill nearby plants. Careful cleaners prevent this damage by pre-wetting the plants with clean water before work begins and rinsing them thoroughly once the job is finished.

Run-off is worth asking about. GOV.UK pollution prevention guidance for businesses states that surface water drains discharge directly to the environment. Only clean water should go into them. It is business guidance and does not mention soft washing, but it is a good reason to ask any cleaner how they protect gutters and outlets. You can check the exact rules on the GOV.UK pollution prevention page.

HSE roof work guidance warns that almost one in five deaths in construction work involve roof work. These fatalities are mostly from falls from roof edges, openings and through fragile roofs and rooflights. HSE states that all roofs should be treated as fragile until a competent person has confirmed they are not.

Homeowners should never attempt roof cleaning themselves. Roofs are for professionals only, and no one should climb on one or use a washer from a ladder. HSE says those carrying out the work must be trained, competent and instructed. You can read the safety requirements on the HSE roof work safety page.

Why some cleaners refuse to pressure wash

If a cleaner refuses to pressure wash your roof, there is a good reason. One major roof tile manufacturer states clearly that high pressure washing can damage roof tiles, particularly older or more delicate ones. They note that the practice is not recommended by most roofing professionals.

Another tile manufacturer agrees, warning that it is crucial to avoid high pressure jet washers on a roof. High pressure can strip the colour from concrete tiles and force water into the interlocks. They also state that anti-moss treatments are not a permanent solution, and they recommend an annual visual inspection to check the roof.

A chemical wash can also be harmful to plants and animals, so gutters and outlets should be protected. It is best to leave the job to experts, and homeowners should not access the roof themselves.

What to ask before you book a soft wash

A good cleaner will happily explain their process and safety measures before you agree to the work. Use this checklist of questions to ensure they are competent and prepared for your specific property:

  • Which product do you use and is it authorised for this exact surface?
  • Do you carry out a full visual survey of the roof before work starts?
  • How do you handle fall protection and access for taller buildings?
  • How exactly do you protect planting, drains and gutters from chemical run-off?
  • What interval do you expect before the surface needs a re-clean?

Always ask for a written quote rather than an estimate. A quote is a fixed price, while an estimate is not. Under the Consumer Rights Act 2015, a service must be carried out with reasonable care and skill. If it is not, the customer can ask for it to be put right or for money back.

The table below shows typical prices per square metre for different roof cleaning methods.

Roof cleaning method

Typical price per square metre

Pressure washing

£8 to £15

Moss removal and biocide

£8 to £15

Soft washing

£10 to £20

Steam cleaning

£11 to £25

These are typical 2026 prices for roof cleaning. Local quotes will differ based on your location and the access required. You can research roof cleaning costs and prices to understand what pushes a final quote up or down.

Common questions

What is soft wash roof cleaning?

Soft wash roof cleaning is a method that applies a low pressure biocide to kill moss and lichen at the root. The chemical does the work, and the rain rinses the dead growth away over the following weeks. It is used to avoid the damage that high pressure jets can cause to roof tiles.

Can you soft wash a house exterior?

Yes, the method is commonly used on exterior walls, including render and uncoated wood. The cleaner must choose the correct chemical for the specific surface and test a hidden area first. They must also protect nearby plants from chemical run-off and ensure the spray does not drift.

Is soft washing safe for all surfaces?

No, the chemicals require careful handling on certain materials. Chlorine can react with organic pigments in some paints, especially reds, blues, greens and oranges, leaving stains that require repainting. Composite resin render is also highly sensitive and needs low pressure testing at a safe distance before a full clean.

What is the difference between soft wash and pressure wash?

Pressure washing removes dirt and growth quickly by physical force, put at 1,500 to 3,000 psi. Soft washing uses chemical solutions to kill organic growth and relies on a gentle rinse, put at under about 100 psi or roughly 80 to 300 psi depending on the estimate. Soft washing takes weeks to show full results.

What to do next

Before you hire a cleaner to treat your roof or exterior walls, take these practical steps to protect your property and your garden.

  • Ask the cleaner to confirm in writing which chemical they will use and how they will protect your plants.
  • Ask how they will protect your gutters and outlets from run-off.
  • Ask for a current public liability insurance certificate in case of accidental damage to paintwork or tiles.
  • Confirm the final price with a written quote rather than a verbal estimate.
  • Point out any overhead power cables before they start work with telescopic poles.

If you agree to a service on the doorstep, by phone or online, it normally carries a 14-day cooling-off period. A reputable firm will be happy to explain their methods, show you their insurance documents and survey your property safely from the ground. When you are ready to get fixed prices, you can find a window cleaner near you to talk through the right cleaning method for your home.

Find a top rated window cleaner near you

1,651 window cleaners across the UK, each ranked on their Google rating and the number of reviews behind it. Start with your county:

All counties and towns · The UK Top 100 window cleaners

Pauline Hart
Written by
Pauline Hart Writer

Pauline writes for Top Rated Window Cleaners, with a focus on helping homeowners compare quotes and ask the right questions. Away from the desk, she swims in the sea all year round.

Looking for a trusted window cleaner? Browse our verified listings.

Find a Window Cleaner