Cost Guides

Should You Seal a Patio or Block Paving and What Does It Cost?

Is sealing a patio or block paving worth it? What sealer does, the types, typical 2026 prices, how often to reseal, the downsides such as bloom and slippery finishes, and what to ask a firm.

Illustration of a block paved patio with a brush, bucket and tin of sealer

If you have just had your paving cleaned, sealing is often offered as the next step. Sealing is described as beneficial rather than strictly essential. The work is usually priced per square metre and will need repeating every few years to maintain the protection.

Do you need to seal a patio or block paving?

Sealing is not compulsory. It is an optional service that offers specific practical benefits depending on the surface you have.

On block paving, a sealer binds the jointing sand into a solid mass. This stops blocks from rocking loose. It also helps to resist weeds in the gaps.

For plain concrete surfaces, sealing helps to resist oil staining, dusting and wear. If you decide not to seal your paving, you can still have it cleaned, as covered in our guide to driveway and block paving cleaning.

What sealer does and the main types

There are several types and finishes of sealer available for residential paving.

  • Acrylic sealer is lower cost and suits concrete and block paving.
  • Water-based acrylic is low odour and is the residential default.
  • Solvent-based acrylic is harder wearing and offers a deeper wet look finish, but has strong fumes and carries a bloom risk.
  • Polyurethane costs more than acrylic options but is longer lasting and highly wear resistant.
  • Finishes can be tailored to your preference with matt, wet look, breathable and anti-slip grit versions available.

Always follow the product label. A professional firm is the better choice for a large area, resin-bound stone or imprinted concrete surfaces.

Which paving benefits most

The type of stone or concrete you have dictates how much sealer is needed. Porous stones like natural sandstone and limestone absorb more sealer, so these patios may need extra coats.

Dense surfaces like porcelain or sealed concrete usually need less sealer.

Imprinted concrete is priced separately by a June 2026 trade price list, at £6 to £12 per square metre, and the same list says it must be resealed every two to three years.

What patio and block paving sealing costs in 2026

Contractors usually price this work by the square metre. Estimates vary across the industry for different surfaces. Some 2026 price lists put block paving at £7 to £15 per square metre, while others suggest £4 to £8 per square metre. The table below keeps the two sets of figures separate. Patio sealing figures come from a separate February 2026 price list, which puts sealing only at £3 to £5 per square metre, and cleaning plus sealing at £5 to £8 per square metre.

The table below shows typical published prices for 2026.

Surface

Typical 2026 price per square metre

Note

Block paving

£7 to £15

First set of price lists, with labour

Block paving

£4 to £8

Second set, including full preparation

Concrete

£6 to £12

First set, with labour

Plain concrete

£4 to £8

Second set

Imprinted concrete

£6 to £12

Second set

Tarmac

£5 to £10

First set, with labour

Asphalt

£4 to £8

First set, with labour

Walls, edgings or paths

£5 to £7

First set, with labour

Patio, sealing only

£3 to £5

February 2026 price list

Patio, cleaning and sealing

£5 to £8

February 2026 price list

These are typical published prices for 2026 and your local quotes will differ. The first set of price lists does not cover patios, which is why the patio figures come separately from a February 2026 list. Looking at whole job prices gives a better sense of the final bill. On the lower block paving price list, a typical 40 to 60 square metre drive comes to £400 to £700, including full preparation.

Some 2026 estimates give whole job prices by area. A small drive of around 30 square metres costs £200 to £250, a medium drive of 60 square metres costs £300 to £400 and a large drive of 90 square metres costs £450 to £600, with an average of around £400.

Whole job patio prices come from the February 2026 price list. A small patio of 10 to 20 square metres costs £200 to £250 for a basic clean and a single coat. A medium patio of 20 to 40 square metres costs £300 to £400, which normally covers cleaning and two coats. A large patio of 40 square metres and over will cost £400 to £500 or more, possibly with a premium or anti-slip sealer.

What changes the price

The baseline square metre rate is only a starting point. Several extra tasks can push the final price higher, starting with the jointing sand. Block paving re-sanding costs an extra £2 to £3 per square metre.

The porosity of your stone also affects the budget. Porous stone such as sandstone may need extra coats, and extra sealer coats cost £3 to £6 per square metre.

Always ask the contractor exactly what is included in their square metre rate. Cleaning is often bundled into the sealing price, so check what is included. Our guide to patio jet washing covers cleaning on its own. Where you live in the UK also changes the rate, as you will pay more for both labour and materials in London and the South East.

How long sealer lasts and when to reseal

Sealer is not a permanent treatment and there is no fixed lifespan for the product. Manufacturers and contractors offer different estimates based on the material and the environment. A block paving sealer manufacturer suggests up to five years, and an imprinted concrete manufacturer suggests resealing every three to five years. Some contractors suggest every two years, others every three to four years. The June 2026 trade price list adds that imprinted concrete must be resealed every two to three years.

Most patios need resealing every three to five years, depending on use and weather exposure. A June 2026 trade price list gives the same three to five years for block paving but says sooner on heavily used or south-facing drives.

Instead of relying on a calendar, you should watch how water behaves on the stone. You will know it is time to reseal when water stops beading on the surface. Other signs are a dull or patchy surface, or algae that returns quickly.

The downsides and what can go wrong

One problem is white bloom, which appears if the paving is sealed while it is still damp. It spoils the look of the surface. White marks on paving can also have other causes, covered in our guide to efflorescence on brick and paving.

Sealing over dirt is another risk. If the surface has not been cleaned first, the sealer locks the contamination in.

The visual finish can also cause issues. Wet look finishes show wear and can be slippery without anti-slip grit.

Finally, there are health and safety risks. Sealing solvents give off strong fumes, meaning you must follow the product label exactly. You must never mix different chemical products together.

What to ask before you book a firm

Before you agree to the work, you need to establish exactly what you are paying for and how the contractor operates. The law provides straightforward protections for this kind of work. Under the Consumer Rights Act 2015, a service must be carried out with reasonable care and skill. If the contractor does a poor job or damages your property, you can ask for the work to be put right or for your money back.

Always ask for a written quote rather than an estimate. A quote is a fixed promise to do the work at an agreed price, and the trader generally cannot charge more unless there is a good reason. An estimate is just the trader's best guess, meaning the final bill could be higher, although it must still be reasonable. If you agree to a service on the doorstep, by phone or online, it normally carries a 14-day cooling-off period. You can find more details on these rules through Citizens Advice.

Ask the contractor these specific questions to avoid misunderstandings.

  • Is the initial deep clean included in this price or charged separately?
  • Will the block paving joints be re-sanded before sealing, and is that in the price?
  • How many coats of sealer does this specific stone require?
  • Is your price per square metre or for the whole job, and what area does it cover?
  • Are you using a water-based or solvent-based product for this job?
  • Does the chosen finish include an anti-slip grit to keep it safe in the wet?
  • How long must the paving be kept clear while the sealer dries?

Common questions

Is sealing indian sandstone patio worth it?

Sandstone is a porous natural stone, so it absorbs more sealer and may need extra coats. Sealing is described as beneficial rather than essential, so ask a firm what it would recommend for your patio and why.

Does block paving sealer stop weeds completely?

Sealer is described as resisting weeds, not as stopping them completely. It binds the jointing sand, which helps to resist weeds taking root in the gaps. No sealer should be promised to keep weeds away for good.

Can you apply block paving sealer yourself?

Follow the product label if you apply sealer yourself, and never mix products. Solvent-based products give off strong fumes. A professional firm is usually the better choice for large areas, resin-bound drives or imprinted concrete.

Does sealing plain concrete stop oil stains?

Sealing plain concrete is described as beneficial. It helps to resist oil staining, dusting and wear. One June 2026 trade price list puts plain concrete sealing at £4 to £8 per square metre.

Does the price include cleaning?

Often it does. Cleaning is often bundled into the sealing price, so check what is included. A February 2026 price list separates the two for patios, at about £3 to £5 per square metre for sealing only and about £5 to £8 for cleaning and sealing, so the difference is worth asking about when you compare quotes.

How long does sealer last?

There is no fixed lifespan. Most patios need resealing every three to five years, depending on use and weather exposure, and some contractors suggest every two years. Reseal when water stops beading, the surface looks dull or patchy, or algae returns quickly.

What to do next

If you are ready to have your paving sealed, take a methodical approach to agreeing the work. Rushing the job or sealing damp stone will ruin the finish, so it pays to be clear about the details upfront.

  • Check whether your paving is porous sandstone or dense porcelain to understand how many coats you need.
  • Decide if you want a subtle matt finish or a glossy wet look with anti-slip grit.
  • Ask contractors if their price includes the initial clean and any necessary block paving re-sanding.
  • Get a written quote rather than an estimate so the price is fixed and cannot be changed without good reason.
  • Check that the contractor plans to let the paving dry completely before applying the sealer to avoid a white bloom.

Taking the time to understand the chemical types and the preparation required means you will not pay for unneeded coats or end up with a cloudy finish. When you are ready to compare local prices, use our directory to find a window cleaner near you, and ask whether they also offer exterior jet washing or patio sealing.

Find a top rated window cleaner near you

1,649 window cleaners across the UK, each ranked on their Google rating and the number of reviews behind it. Start with your county:

All counties and towns · The UK Top 100 window cleaners

Amy Fisher
Written by
Amy Fisher Writer

Amy researches and writes guides for Top Rated Window Cleaners, turning prices, rules and official guidance into plain advice for homeowners. She is a keen birdwatcher.

Looking for a trusted window cleaner? Browse our verified listings.

Find a Window Cleaner