Composite decking has a different surface to traditional timber boards, so you should not treat it the same way you would treat a standard wooden deck. One maker says it does not recommend sanding at all.
The age of your boards also changes how you should care for them. One maker does not recommend the use of a pressure washer on its early-generation decking at all. You need to know what type of board you have before you start cleaning.
Different ranges may have different rules. One UK supplier says grease, surface growth and changes in colour do not necessarily respond to the same treatment, so check the care guide for your exact board range before you apply any treatment or use any power tools.
The gentle clean to try first
One maker says soap and water are all that is needed to clean composite decking to remove dirt and debris. Start with this gentle approach before you consider stronger chemicals or heavy equipment.
Follow these steps for a safe and gentle clean:
- Start by clearing the deck of all furniture, plant pots and obstacles.
- Sweep the boards thoroughly to remove loose leaves, twigs and surface dirt.
- Mix warm soapy water in a standard bucket and dip your soft bristle brush into the solution.
- Scrub the boards gently in small sections.
- Rinse the area thoroughly with a garden hose.
Using a hose and warm soapy water with a soft bristle brush is recommended by one maker to remove the food source for mould. One manufacturer also recommends removing dirt and debris weekly with a broom or a leaf blower.
Mould, algae and dirt on composite boards
Dirt and debris are described as the food source for mould, so the aim is to remove them regularly. Wet leaves and organic debris left sitting on your deck are best swept off.
Using a hose and warm soapy water with a soft bristle brush is recommended to remove the food source and the mould.
Food spills need prompt attention. One maker states that the surface must be cleaned of food spills within seven days to maintain the stain warranty.
Another composite maker says stains should be cleaned within one week to keep warranty cover. Check your own terms to see exactly how long you have to act. Use warm soapy water and a soft brush first.
Can you pressure wash composite decking?
Whether you can pressure wash your decking depends on the manufacturer and the age of your boards. One maker does not recommend the use of a pressure washer on early-generation decking at all. For its current ranges, the same maker allows pressure washing within a maximum pressure and a minimum distance, and other makers set their own limits.
Pressure washing with too much pressure can cause irreversible damage to composite decking. One UK supplier says to use a fan attachment, not a concentrated jet.
A UK decking supplier states you should use no more than 3,100 PSI for its boards, and describes this as a ceiling, advising you to start lower. They also specify that the fan attachment must be kept at least 250 mm from the surface. Another composite board maker says a pressure washer with no greater than 3100 PSI with a fan tip may be used on its current ranges, keeping the tip no closer than 8 inches (203 mm) from the surface.
Another maker sets a much lower limit, stating you should use a fan tip blade with no more than 1300 PSI and keep the wand at least 10 inches from the deck surface. Meanwhile, a decking cleaner manufacturer specifies a maximum of 50 bar when rinsing its particular cleaning product off the boards. Always wash your deck with warm soapy water and a soft bristled brush before moving to any pressure washing.
This table shows how maximum pressure and minimum distance limits differ between makers.
|
Manufacturer example |
Maximum pressure |
Minimum distance |
|---|---|---|
|
UK decking supplier |
3,100 PSI |
250 mm |
|
Composite board maker |
3,100 PSI |
8 inches (203 mm) |
|
Another composite maker |
1,300 PSI |
10 inches |
|
Decking cleaner maker |
50 bar |
Not specified |
These are examples that differ between makers and ranges, so use your own maker's figure and start lower. A pressure limit is a ceiling, not a target.
What can damage composite boards
Products containing bleach or acid will lighten the surface of the boards. If warm soapy water is not enough, use only manufacturer recommended cleaning products.
One maker says never to use acetone or other solvents on its railing. If you are using a specialist decking cleaner, never mix products together and always follow the safety instructions on the label.
The same maker says never to use a metal snow shovel on its decking, and does not recommend sanding the boards.
Will cleaning or pressure washing affect your guarantee?
One UK supplier says its decking is backed by up to 25 years' warranty, but warranty terms differ between makers and ranges. If you ignore the care guide, you may risk your cover when things go wrong.
Damage caused by pressure washing may not be covered. One maker states that pressure washing damage will void the warranty with respect to any condition caused by the pressure washing. Another says pressure washing with too much pressure can cause irreversible damage to composite decking.
Check your own terms carefully so you know exactly what is expected of you, paying close attention to:
- The exact maximum pressure limits allowed for your specific board range.
- Whether pressure washing is completely banned for your generation of decking.
- The strict time limits for cleaning up food spills and grease.
- Which specific cleaning products are recommended or banned by name.
Keep a written note of the dates you clean your deck and the exact method you used. If you hire a professional to handle your decking cleaning methods, ask them for an invoice that states the pressure levels and products they applied. This paperwork may help if you ever need to make a warranty claim.
How often to clean composite decking
Routine cleaning helps to stop dirt building up. One maker states that semi-annual cleaning of your composite decking is important, in spring and autumn.
Between these cleans, one maker recommends removing dirt and debris weekly with a broom or a leaf blower.
Treat food spills promptly. One maker gives seven days and another one week to keep its stain warranty, so check your own terms.
When to hire a professional
You should consider hiring a professional exterior cleaner if your deck is very large or if the stains are old and stubborn. A professional will have the equipment to clean large areas quickly and evenly. They can also handle the job if you do not have the time or physical ability to scrub the boards by hand.
When you speak to a professional, ask them to confirm that they follow the specific maker's care guide for your boards. Ask them to show you the guide they are working from, and check that they know the exact pressure limits and safe distances. A good professional will understand why composite boards need different care to timber.
If a professional damages your deck by using too much pressure or the wrong chemicals, you have legal protections. Citizens Advice notes that under the Consumer Rights Act 2015, a trader must do the work with reasonable care and skill. If they do not, you can ask them to put it right or ask for a refund if only the service was provided.
Always keep your paperwork, take photos of the deck before the work starts, and note the dates the cleaner visits. This evidence will help you if you need to raise a problem politely.
Common questions
What is the best composite decking cleaner?
One maker says soap and water are all that is needed to clean composite decking. If you have stubborn stains, use only manufacturer recommended cleaning products listed in your care guide.
How do you stop composite decking being slippery?
Check your maker's care guide for anything specific to slippery boards. Warm soapy water with a soft bristle brush is recommended to remove the food source for mould, and one maker recommends removing dirt and debris weekly with a broom or leaf blower.
Can you use bleach on composite boards?
One maker says products containing bleach or acid will lighten the surface of the boards. Stick to warm soapy water or the cleaning products your manufacturer recommends, and never mix products.
Can you pressure wash older composite decking?
Check your specific care guide before pressure washing older boards. One manufacturer does not recommend the use of a pressure washer on early-generation decking, and says pressure washing damage is not covered by its warranty.
What should I avoid on composite decking?
One maker says products containing bleach or acid will lighten the surface, never to use acetone or other solvents on its railing, never to use a metal snow shovel, and that it does not recommend sanding. Check your own maker's list, and never mix products.
What if a cleaner damages my decking?
Citizens Advice says a trader must do the work with reasonable care and skill under the Consumer Rights Act 2015. If they did not, you can ask them to put it right or, if only the service was provided, ask for a refund. Keep paperwork, take photos and note dates.
Does pressure washing void a composite decking guarantee?
Do not assume that any cleaning voids a guarantee, but damage caused by pressure washing may not be covered. One maker says pressure washing damage will void the warranty with respect to any condition caused by the pressure washing, so check your own terms and keep a note of the dates and method you used.
How often should composite decking be cleaned?
One maker says semi-annual cleaning, in spring and autumn, is important. Between those cleans, another recommends removing dirt and debris weekly with a broom or a leaf blower.
What to do next
Before you start cleaning your deck or hire a professional to do it for you, gather your information and plan the job safely. Taking a few minutes to check the rules will protect your boards and your guarantee.
- Find the original paperwork for your decking to check the manufacturer and the specific board range.
- Read the care guide to find the exact pressure limits, safe distances and permitted cleaning products.
- Check your warranty terms for strict rules on pressure washing and timelines for cleaning food spills.
- Sweep the deck thoroughly to remove loose dirt and leaves before you apply any water.
- Test your warm soapy water and soft bristle brush on a small, hidden area of the deck first.
- If you hire a professional, ask them to confirm in writing that they will follow your manufacturer's specific care guide.
If you decide the job is too large to tackle yourself, or if you want to ensure the work is done safely with the right equipment, it is time to bring in an expert. You can use our directory to find a window cleaner near you and ask whether they also offer exterior cleaning services and can follow your maker's care guide.
Find a top rated window cleaner near you
1,649 window cleaners across the UK, each ranked on their Google rating and the number of reviews behind it. Start with your county: